u 个人简介

  郭非，副教授，硕士生导师。2017年6月毕业于重庆大学材料科学与工程学院，获材料科学与工程专业工学博士学位，博士期间前往德国亚琛工业大学物理冶金所联合培养。从事镁、铝合金塑性加工成形、织构演化及表面特种加工方面研究。在国内外重要刊物如Scripta Materialia, Materials Science and Engineering: A, Journal of Alloys and Compounds, Journal of Magnesium and Alloys等期刊上发表学术论文30余篇。

u 研究领域

先进轻合金(镁、铝)强韧化；超轻镁锂合金织构及组织调控；轻合金表面工程；

u 承担的主要项目

1. 孪晶取向诱导制备三维析出结构提升Mg-Al合金时效强化效率研究，国家自然科学基金项目，2023.01-2025.12，30万元，主持。

2. 基于激光熔凝优化表层晶界特征提升新型镍基合金抗氢脆性能研究，中国博士后科学基金面上资助，2022.01-2023.12，8万元，主持。

3. 镁锂合金室温变形中反常应变速率敏感性行为研究，重庆市教委科学技术研究项目，2022.10-2025.09，4万元，主持。

4. 强剪切轧制制备相界晶界双重细化镁锂合金及其强韧化研究，重庆市科委自然科学面上项目，2019.7-2022.6，10万元，主持。

5. 双相镁锂合金两相变形协调机制研究，重庆市教委科学技术研究项目，2018.10-2021.9，5万元，主持。

6. 飞机高强韧铝合金精密模锻件开发与产业化，重庆市科委技术创新与应用发展专项重点项目，2019.1-2021.12，37.5万元，校内负责人。

7. 镁铝合金第二相颗粒诱导再结晶行为研究，重庆市留学人才创新创业计划，5万元 2018.7-2020.8，主持

u 代表性成果

[1]   X. Li, L. Jiang, F. Guo, Y. Ma, H. Yu, Q. Chen, H. Liu, D. Zhang, Unveiling the rolling texture variations of α-Mg phases in a dual-phase Mg-Li alloy, Journal of Magnesium and Alloys. (2022).

[2]   Q. Li, F. Guo, L. Chai, Y. Ma, L. Jiang, Q. Chen, C. Zhang, H. Liu, D. Zhang, B. Jiang, Redistribution and refinement of the dendrites in a Mg-Y alloy by laser surface remelting and its influence on mechanical properties, Materials Science and Engineering: A. 848 (2022) 143362.

[3]   F. Guo, W. Huang, X. Yang, H. Dong, H. Yu, Q. Chen, L. Hu, L. Jiang, Variation of mechanical properties and microstructure of hot-rolled AA2099 Al-Li alloy induced by the precipitation during preheating process, Journal of Materials Science & Technology. 110 (2022) 198–209.

[4]   X. Li, F. Guo, Y. Ma, L. Jiang, H. Lai, H. Liu, D. Zhang, R. Pei, Rolling texture development in a dual-phase Mg-Li alloy: The role of temperature, Journal of Magnesium and Alloys. (2021) S2213956721002851.

[5]   L. Jiang, W. Jiang, F. Guo, W. Huang, H. Dong, H. Hu, Q. Dai, Micro-nano structure characteristics and texture evolution of the friction stir processed dual-phase Mg Li alloy, Materials Characterization. 173 (2021) 110979.

[6]   F. Guo, H. Dong, W. Huang, X. Yang, L. Hu, M. Li, L. Jiang, Nanocrystalline structure fabricated by cryogenic temperature rolling of AA 2099 aluminum alloy, Journal of Alloys and Compounds. 864 (2021) 158293.

[7]   H. Dong, F. Guo, W. Huang, X. Yang, X. Zhu, H. Li, L. Jiang, Shear banding behavior of AA2099 Al-Li alloy in asymmetrical rolling and its effect on recrystallization in subsequent annealing, Materials Characterization. 177 (2021) 111155.

[8]   F. Guo, R. Pei, L. Jiang, D. Zhang, S. Korte-Kerzel, T. Al-Samman, The role of recrystallization and grain growth in optimizing the sheet texture of magnesium alloys with calcium addition during annealing, Journal of Magnesium and Alloys. 8 (2020) 252–268.

[9]   F. Guo, L. Liu, Y. Ma, L. Jiang, Y. Zhang, D. Zhang, F. Pan, Slip behavior and its effect on rolling texture development in a dual-phase Mg–Li alloy, Journal of Alloys and Compounds. 813 (2020) 152117.

[10] F. Guo, L. Liu, Y. Ma, L. Jiang, D. Zhang, F. Pan, Mechanism of phase refinement and its effect on mechanical properties of a severely deformed dual-phase Mg–Li alloy during annealing, Materials Science and Engineering: A. 772 (2020) 138792.

[11] F. Guo, L. Jiang, Y. Ma, L. Liu, Z. Zhang, M. Yang, D. Zhang, F. Pan, Strengthening a dual-phase Mg–Li alloy by strain-induced phase transformation at room temperature, Scripta Materialia. 179 (2020) 16–19.

[12] F. Guo, D. Zhang, X. Fan, J. Li, L. Jiang, F. Pan, Microstructure, texture and mechanical properties evolution of pre-twinning Mg alloys sheets during large strain hot rolling, Materials Science and Engineering: A. 655 (2016) 92–99.

[13] F. Guo, D. Zhang, X. Fan, L. Jiang, D. Yu, F. Pan, Deformation behavior of AZ31 Mg alloys sheet during large strain hot rolling process: A study on microstructure and texture evolutions of an intermediate-rolled sheet, Journal of Alloys and Compounds. 663 (2016) 140–147.

[14] F. Guo, D. Zhang, H. Wu, L. Jiang, F. Pan, The role of Al content on deformation behavior and related texture evolution during hot rolling of Mg-Al-Zn alloys, Journal of Alloys and Compounds. 695 (2017) 396–403.

[15] F. Guo, D. Zhang, X. Yang, L. Jiang, F. Pan, Strain-induced dynamic precipitation of Mg17Al12 phases in Mg–8Al alloys sheets rolled at 748 K, Materials Science and Engineering: A. 636 (2015) 516–521.

[16] F. Guo, D. Zhang, X. Yang, L. Jiang, S. Chai, F. Pan, Effect of rolling speed on microstructure and mechanical properties of AZ31 Mg alloys rolled with a wide thickness reduction range, Materials Science and Engineering: A. 619 (2014) 66–72.

u 联系方式

电话：15923277268；E-mail：guofei@cqut.edu.cn